CPlatformApiFrontend

1. General info


2. Asserts
3. Cables
4. Components
5. Internals
6. Modules
7. Provides
• tun : IPlfApiTuning



• chdec : IPlfApiChanDec



• errid : IPlfApiErrorIds



• ciplusinit : IPlfApiCiPlusInit



• chdecdvbt : IPlfApiChanDecDvbT

Calls to SetGuardInterval are ignored, guard interval is fixed to GuardIntervalAuto due to performance reasons.


• snd : IPlfApiSoundDecode



• chdec2 : IPlfApiChanDec



• ciplushc : IPlfApiCiPlusHC



• apitest : IPlfApiTest



• chantab : IPlfApiChanTable



• chdecsel : IPlfApiChanDecSelect

This interface must be used to select between the DVB-T,the DVB-C and DVB-S channel decoders. The default channel decoder selected by platform is DVB-T. The calls to the DVB-T decoder and the DVB-C decoder are always executed towards the hardware. In the digital use case both decoders are always connected to the IF input signal. The only mechanism to select between the two decoders is by 'tristating' one of the outputs and enabling the other. Also, both outputs are always connected hardware wise. So, any SW call is forwarded to the hardware and by selecting one of the decoders via IPlfApiChanDecSelect the output of that decoder is enabled.


• dvbs : IPlfApiDvbs



• ssys : IPlfApiSoundSystem



• tsdmx : IPlfApiTsDmxAbstract



• ciplushlc : IPlfApiCiPlusHLC



• chdecisdbt2 : IPlfApiChanDecISDBT2



• vbisl : IPlfApiVbiSlice



• feitfid : IPlfApiResourceFrontendInterfaceIds



• soc : IPlfApiSoundChannel



• diseq : IPlfApiDiseqc



• rfamp : IPlfApiRfAmp

This interface is currently not used.


• sad : IPlfApiSoundAudioDescription



• vbiins : IPlfApiVbiInsert



• feitf : IPlfApiResourceAvailability



• ciplusai : IPlfApiCiPlusAI



• ciplusstatus : IPlfApiCiPlusStatus



• stcdec : IPlfApiStcDec



• ssm : IPlfApiSigStrengthMeas

Signal strength measurement is only supported for digital channels.


• chdecisdbt : IPlfApiChanDecISDBT



• ciplusmmi : IPlfApiCiPlusMMI



• ciplusca : IPlfApiCiPlusCa



• vfr : IPlfApiVideoFreeze

In case the platform cannot maintain the freeze (e.g. program change), it will fall back to a black muted picture. Only when unfreezing, this black mute will be removed. A call of the SetFreeze(TRUE/FALSE)-function should only be done in the single window digital usecase.


• cipluscc : IPlfApiCiPlusCc



• hsys : IPlfApiSoundSystem



• vip : IPlfApiVideoProperties



• qssm : IPlfApiSigStrengthMeas

Signal strength measurement is only supported for digital channels.


• assm : IPlfApiSigStrengthMeas

Signal strength measurement is only supported for digital channels.


• ciplusupgr : IPlfApiCiPlusUpgr



• ciplusammi : IPlfApiCiPlusAMMI



• aclip : IPlfApiAudioClip



• prs : IPlfApiPreset



• chdecdvbc : IPlfApiChanDecDvbC



• col : IPlfApiColorDecode



• vclip : IPlfApiVideoClip



8. Requires
• ciplusstatusntf : IPlfApiCiPlusStatusNotify



• vipN : IPlfApiVideoPropertiesNotify



• qssmN : IPlfApiSigStrengthMeasNotify



• chdec2N : IPlfApiChanDecNotify



• dvbsN : IPlfApiDvbsNotify



• vfrN : IPlfApiVideoFreezeNotify



• vclipN : IPlfApiVideoClipNotify



• aclipN : IPlfApiAudioClipNotify



• ssysN : IPlfApiSoundSystemNotify



• ciplusmmintf : IPlfApiCiPlusMMINotify



• socN : IPlfApiSoundChannelNotify



• chdecN : IPlfApiChanDecNotify



• ciplusccntf : IPlfApiCiPlusCcNotify



• ciplusupgrntf : IPlfApiCiPlusUpgrNotify



• stcdecN : IPlfApiStcDecNotify



• assmN : IPlfApiSigStrengthMeasNotify



• ssmN : IPlfApiSigStrengthMeasNotify



• tsdmxN : IPlfApiTsDmxAbstractNotify



• apitestntf : IPlfApiTestNotify



• feitfN : IPlfApiResourceAvailabilityNotify



• tunN : IPlfApiTuningNotify



• vbislN : IPlfApiVbiSliceNotify



• hsysN : IPlfApiSoundSystemNotify



• ciplushcntf : IPlfApiCiPlusHCNotify



• cipluscantf : IPlfApiCiPlusCaNotify



• ciplusinitntf : IPlfApiCiPlusInitNotify



• diseqN : IPlfApiDiseqcNotify



• ciplusaintf : IPlfApiCiPlusAINotify



• colN : IPlfApiColorDecodeNotify



• ciplusammintf : IPlfApiCiPlusAMMINotify



9. Dependencies

	chdec	chdecsel	chdecdvbt	chdec2	chdecisdbt2	chdecisdbt	chdecdvbc
chdec	-	Dep-1	-	-	-	-	-
chdecsel	-	-	-	-	-	-	-
chdecdvbt	-	Dep-2	-	-	-	-	-
chdec2	-	Dep-3	-	-	-	-	-
chdecisdbt2	-	Dep-4	-	-	-	-	-
chdecisdbt	-	Dep-5	-	-	-	-	-
chdecdvbc	-	Dep-6	-	-	-	-	-



• Dep-1: chdec - chdecsel

chdecsel is to be used to enable the output of the decoder.


• Dep-2: chdecdvbt - chdecsel

chdecsel is to be used to enable the output of the decoder.


• Dep-3: chdec2 - chdecsel

chdecsel is to be used to enable the output of the decoder.


• Dep-4: chdecisdbt2 - chdecsel

chdecsel is to be used to enable the output of the decoder.


• Dep-5: chdecisdbt - chdecsel

chdecsel is to be used to enable the output of the decoder.


• Dep-6: chdecdvbc - chdecsel

chdecsel is to be used to enable the output of the decoder.



10. Uses

---

Copyright © 2009, Koninklijke Philips Electronics N.V.